SIGEN 2+ Signal Transmitter Electrician’s Kit

  • P.A.C.T. SIGEN 2+ Signal Transmitter
  • Earth Stake
  • Connection Leads
  • Manufacturer’s Calibration
  • 8x AA Batteries – Fitted
  • Carry Bag
  • 3-Pin Plug Connector
  • 100mm Signal Clamp

£536.00

    • 0 £

SIGEN 2+ Signal Transmitter Electrician’s Kit Details

The P.A.C.T. SIGEN 2+ Signal Transmitter Electrician’s Kit consists of the P.A.C.T. SIGEN 2+ Signal Transmitter, a Carry Bag, a 100mm Signal Clamp and a 3-Pin Plug Connector. For an overview of the other P.A.C.T. SIGEN 2+ Signal Transmitter Kits available, please see the ‘Available Kits’ section.

Please see the descriptions below for further information regarding the products included in this kit.

SIGEN 2+ Signal Transmitter Description

The P.A.C.T. SIGEN 2+ Signal Transmitter can be used to locate services and reduce the strike rate of electricians carrying out work. It can be used with cable locators capable of receiving 33kHz signals, such as P.A.C.T.’s TOMKAT S2 and V2 Pipe and Cable Locators, to identify the location of cables and pipes.

To facilitates this instrument’s detection capabilities it is supplied, as standard, with an earth stake and connection leads. It is also supplied with a manufacturer’s calibration to ensure reliability and functionality.

Additionally, the P.A.C.T. SIGEN 2+ Signal Transmitter is fitted with eight AA batteries proving the instrument with up to forty hours of continuous power. The absence of an audible tone indicates that the batteries require replacing.

The long operating time of the P.A.C.T. SIGEN 2+ Signal Transmitter adds to its practicality, as does its rugged ABS construction. The P.A.C.T. SIGEN 2+ Signal Transmitter is also weatherproof to IP54 and has been CE tested. The rugged, weatherproof design of the P.A.C.T. SIGEN 2+ Signal Transmitter makes it suitable for use in a variety of rugged, outdoor environments, adding to its versatility.

The P.A.C.T. SIGEN 2+ Signal Transmitter also includes an isolated transformer allowing it to be connected to a mains supply via a 3-pin plug connector (max mains rating: 230V AC), again expanding its scope-for-use.

Further to this, the P.A.C.T. SIGEN 2+ Signal Transmitter includes two modes of operation, Induction and Connection, and low- and high-volume outputs. The low-volume output allows the operator to use the P.A.C.T. SIGEN 2+ Signal Transmitter in quiet environments, whilst its high-volume output allows the user to establish a better connection tone.

Moreover, the P.A.C.T. SIGEN 2+ Signal Transmitter features a low-power output and a high-power output. It is possible to change from a low-power output to a high-power output at the flick of a switch. This allows the user to determine a familiar, continuous tone.

The P.A.C.T. SIGEN 2+ Signal Transmitter is a resilient, adaptable and versatile instrument suitable for locating cables and pipes to ensure that electrical work can be carried out safely and effectively.

SIGEN 2+ Signal Transmitter Key Features

  • Locate services and reduce the strike rate of electricians carrying out work
  • Can be used with cable locators capable of receiving 33kHz signals
  • Suitable for use with P.A.C.T.’s TOMKAT S2 and V2 Pipe and Cable Locators
  • Locate cables and pipes
  • Supplied as standard with an earth stake and connection leads
  • Supplied with a manufacturer’s calibration
  • Equipped with eight fitted AA batteries providing up to forty hours of continuous power
  • The absence of an audible tone indicates when the batteries need replacing
  • Rugged ABS construction
  • IP54
  • CE tested
  • Suitable for use in a variety of outdoor environments
  • Isolated transformer facilitating a connection to a mains supply via a 3-pin plug connector (max mains rating: 230V AC)
  • Two modes of operation: Induction and Connection
  • Low- and high-volume outputs
  • Low-volume output allows the transmitter to be used in quiet locations
  • High-volume output allows the user to establish a better connection tone
  • Low-power and high-power output
  • Change from a low-power output to a high-power output at the flick of a switch to determine a familiar, continuous tone
  • A resilient, adaptable and versatile instrument
  • Suitable for locating cables and pipes to ensure that electrical work can be carried out safely and effectively

P.A.C.T. 100mm Signal Clamp Description

The P.A.C.T. 100mm Signal Clamp can be used with P.A.C.T.’s SIGEN2+ Signal Transmitter and one of P.A.C.T.’s TOMKAT S2 or V2 Pipe and Cable Locators to detect and trace buried insulated cables, such as those used by street lights.

Its 100mm diameter ensures that it is able to fit around insulated conductors allowing the user to apply a signal directly and safely to the cable. Furthermore, the P.A.C.T. 100mm Signal Clamp’s wide diameter means that good contact with a conductor is established without having to remove any insulation.

The P.A.C.T. 100mm Signal Clamp is operated using the following method:

1.)    Plug the bulgin plug into the SIGEN 2+’s connection socket within the accessory compartment

2.)    Enclose the clamp’s jaws around the cable-under-investigation, ensuring that the jaws are completely closed

3.)    Turn on the SIGEN 2+

4.)    Set P.A.C.T.’s TOMCAT Pipe and Cable Locators to Genny Mode and trace the cable

The P.A.C.T. 100mm Signal Clamp is a simple-to-use instrument allowing the user to safely, efficiently and accurately trace insulated cables by applying a signal directly to the conductor.

P.A.C.T. 100mm Signal Clamp Key Features

  • Use with the SIGEN 2+ Signal Transmitter and one of P.A.C.T.’s TOMKAT Pipe and Cable Locators
  • Detect and trace buried, insulated cables such as those used by street lights
  • 100mm diameter
  • Apply a signal directly and safely to the cable
  • A good contact to the conductor is established without having to remove any insulation
  • Simple-to-use instrument
  • Safely, efficiently and accurately trace insulated cables by applying a signal directly to the conductor

P.A.C.T. 3-Pin Plug Connector Description

The P.A.C.T. 3-Pin Plug Connector can be used to apply a signal directly to a mains supply via a domestic socket. This connector features a 2m lead.

Available Kits

There are four P.A.C.T. SIGEN 2+ Signal Transmitter Kits available; please see the table below for a quick overview of the items included in each kit.

P.A.C.T. Products
Kit
P.A.C.T. SIGEN 2+ Signal Transmitter
Manufacturer’s Calibration
8x AA Batteries – Fitted
Earth Stake
Connection Lead Set
Carry Bag
3-Pin Plug Connector
100mm Signal Clamp
5m Sonde (33kHz)
P.A.C.T. SIGEN 2+ Signal Transmitter Standard Kit
X
X
X
X
X
X
P.A.C.T. SIGEN 2+ Signal Transmitter Electrician’s Kit
X
X
X
X
X
X
X
X
P.A.C.T. SIGEN 2+ Signal Transmitter Drain Kit
X
X
X
X
X
X
X
P.A.C.T. SIGEN 2+ Signal Transmitter Builder’s Kit
X
X
X
X
X
X
X
X